728*90

User Tag List

Results 1 to 1 of 1

Thread: XCooter Blaster XC300GT "issues"

  1. #1

    XCooter Blaster XC300GT "issues"

    Join Date
    Jun 2019
    Location
    Phoenix, AZ
    Posts
    1
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Thumbs Up/Down
    Received: 0/0
    Given: 0/0
    Rep Power
    0

    0 Not allowed! Not allowed!

    XCooter Blaster XC300GT "issues"

    250*250-1
    I can effectively state that I have no clue as to what I am doing. I get things that I am told will work together and then they don't. So, here is what I currently have:

    1x XCooter Blaster XC300GT

    1x 600w Brushed DC Permanent Magnet Motor

    2x 10" X 4" Air filled tires

    1x 40 amp fuse

    1x Motor Belt

    1x variable voltage DC Brushed Motor Controller (link provided) Motor Speed Controller, DC 10-55V... https://www.amazon.com/dp/B07JH13VVP...p_mob_ap_share


    So, we hooked it up and the motor was fine except you went from 0 to 100 instantly! Lol. Not cool if you need to regulate your speed. That is with the potentiometer hooked up that came with it.

    Next we tried a typical e-scooter twist grip throttle. It ran backwards. And only slowed if you twisted the throttle.

    So, we flipped the throttle Magnet. Reversing polarity. It went forward, but at a 14-89 % functionality range. Meaning at its lowest, the motor was running at 14% (never turns off) and highest 89% (not full speed). Again, a potential problem.

    The throttle we tried was a hall sensor throttle. Which I am sure is part of the problem. Then the other part would be the controller, is probably not for e-bikes and scooters.

    Any suggestions besides a magura 5k ohm throttle?
    Attached Thumbnails Attached Thumbnails XCooter Blaster XC300GT "issues"-1560356953249-jpg  

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •